Cục đẩy công suất DBZ DMi 2|2000A

(0 khách hàng Hỏi đáp và tư vấn)

Bạn cần tư vấn, gọi ngay

Hà Nội : 0904.38.28.58 (Mr Văn)

Hồ Chí Minh : 0903.60.22.47 (Mr Sư)

thông tin sản phẩm

  • Thương hiệu

    DBZ

  • Bảo hành

    12 tháng

  • Tình trạng HH

    0

  • Tồn kho

    Còn hàng

Giá bán: 0 đ

  • Giá cũ: 0 đ
  • Còn hàng

Thông số kỹ thuật

Model DMi 2|2000A
8 ohms 680Wx2
4ohms 1100W*x2
2 ohms 1300W*x2
8 ohms Bridged 2200W*x1
THD+N (typical) ≤0.03% (1/2 Rated Output Power)
Frequency Response 20Hz-32KHz ( +0/-0.5dB)
Signal To Noise Ratio 98dB
Damping Factor 200 (1 kHz and below)
Channel separation 70dB (1 kHz and below)
Amplifier gain selectable 0.775V/1V/32dB
Input Impedance 20KΩ/10KΩ (balanced/Unbalanced)
Default gain 38.2dB/36dB/32dB
Output Circuitry  Class 2H
Cooling  front-to-rear airflow
Protection circuit Soft start, DC, short circuit, clip limit, over heat, temperature rise automatic reduce power, progressive volume
Front panel indicator Working state, voltage, CLIP, SIG, ON, LCD screen
Rear panel indicator front-to-rear airflow
Front panel Power switch/Volume control
Rear panel Stereo/Parallel/Bridge
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output connectors (per ch.) Nl4 Speakon, Binding post.
Product outline dimension 483mmx418mmx89mm
Outer packing size 600mmx555mmx185mm
Gross weight 21.0kg
Power ~220V/50Hz.±10%

 

Cục đẩy công suất 2 kênh DBZ DMi 2|2000A chính hãng tại TCA - Trung Chính Audio. Bộ khuếch đại công suất chuyên nghiệp dòng DMi sử dụng cấu trúc liên kết mạch Class 2H theo mức công suất. Các bảng mô-đun amp chọn điện trở cắm chân đồng, có hiệu suất tốt trên toàn bộ khoảng dải tần đáp ứng âm thanh. DBZ DMi 2|2000A cung cấp công suất âm thanh 680W 2 kênh ở trở kháng 8 ohms và tối đa đạt được là 1300W mỗi kênh ở trở kháng 2ohms.

Dowload Catalogue

Bảng thông số kỹ thuật :

Model DMi 2|2000A
8 ohms 680Wx2
4ohms 1100W*x2
2 ohms 1300W*x2
8 ohms Bridged 2200W*x1
THD+N (typical) ≤0.03% (1/2 Rated Output Power)
Frequency Response 20Hz-32KHz ( +0/-0.5dB)
Signal To Noise Ratio 98dB
Damping Factor 200 (1 kHz and below)
Channel separation 70dB (1 kHz and below)
Amplifier gain selectable 0.775V/1V/32dB
Input Impedance 20KΩ/10KΩ (balanced/Unbalanced)
Default gain 38.2dB/36dB/32dB
Output Circuitry  Class 2H
Cooling  front-to-rear airflow
Protection circuit Soft start, DC, short circuit, clip limit, over heat, temperature rise automatic reduce power, progressive volume
Front panel indicator Working state, voltage, CLIP, SIG, ON, LCD screen
Rear panel indicator front-to-rear airflow
Front panel Power switch/Volume control
Rear panel Stereo/Parallel/Bridge
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output connectors (per ch.) Nl4 Speakon, Binding post.
Product outline dimension 483mmx418mmx89mm
Outer packing size 600mmx555mmx185mm
Gross weight 21.0kg
Power ~220V/50Hz.±10%